gribitYour logbook →
← All guides

How to Prepare for an HSE or Fire Service Inspection

Published · gribit

Inspector examining a pub fire door

The best preparation for an HSE or fire and rescue service inspection is a set of dated records that show your safety checks happen on schedule, plus staff who know what to do. Inspectors can arrive without warning, so the work has to be done before the knock. In practice that means a current fire risk assessment, test and maintenance records, training and drill logs, and a clear trail showing that problems found were fixed. Gribit’s digital logbook keeps those records in one place for £49 per year per site.

Gribit
Keep Safety Records Inspection-Ready
Gribit helps small businesses record recurring safety checks, manage follow-ups, and store certificates and documents in one digital logbook.
Visit

TL;DR

  • Which body visits depends on your premises: fire and rescue services usually enforce fire precautions, while HSE covers wider workplace health and safety.
  • Visits can be unannounced, and inspectors can ask questions, take photographs and ask for records.
  • Have your fire risk assessment, test and maintenance records, training and drill logs, and staff information ready to hand.
  • A problem found is not the end: the notice you receive sets out what to fix and by when, and your records show the fix.
  • Dated, searchable records beat a folder you rebuild the night before.

Table of Contents

Who might inspect you, and why

Two main bodies turn up at small workplaces in Great Britain. HSE explains that fire and rescue authorities are the principal enforcers for fire risks and precautions, while HSE deals with fire risks arising from work activities in workplaces, and with all fire matters at construction and major hazard sites. For a typical shop, pub, salon, office or village hall, the fire and rescue service is the one that checks your fire precautions. HSE or your local authority looks at general health and safety, depending on the type of business.

The power to visit is broad. One fire service states that it can enter any premises at any reasonable time if an inspector believes it is necessary. HSE’s own leaflet says an inspector may arrive without warning, and the law allows visits at any reasonable time, though inspectors must follow the government’s code of practice on entering homes or businesses.

What prompts a visit? An international summary of UK labour inspection says enforcement is driven largely by proactive inspections and, reactively, by investigations of accidents, ill-health and complaints. A fire in your building matters too: Avon Fire and Rescue says commercial premises with a fire-related incident attended by the service typically receive a follow-up inspection.

Your furnishings come into this as well, because what you put in a room affects how fire behaves. If you are refitting a hospitality space, it helps to understand rug fire ratings in England before you buy.

Procedures vary a little between fire services and across the UK. Scotland, Wales and English services publish their own audit guidance, and the outcomes are described differently, but the core questions are the same everywhere: have you assessed the risk, are your precautions working, and can you prove it?

What inspectors actually look at

The premises

HSE says its inspectors look at how you keep workers and others affected by your work healthy and safe. They may ask about workers and health risks, look at machinery or equipment, ask to see records or documents, and take photographs.

Fire service visits are more specific. Devon and Somerset Fire and Rescue says its inspection considers how you reduce the risk of fire and its spread, whether escape routes are enough and safe, how you detect fire and raise the alarm, whether people know what to do, how you would fight a fire, and how you maintain your fire safety measures. Manchester Fire and Rescue lists what its inspectors confirm on a walk round: alarm and fire-fighting equipment in working order, fire doors in good condition, signed and clear emergency routes, and working emergency lighting. Avon adds that officers check the fire alarm panel, detection, emergency lighting and signage.

Your people

Inspectors do not only look at walls and extinguishers. Fire services say they may talk to employees to confirm their level of fire safety awareness. A new starter who cannot say where the assembly point is will undo a lot of good paperwork. This is why induction and drill records matter as much as test logs.

Your paperwork

Powers for fire safety inspectors include requiring production of records and taking copies. If you cannot produce a record, the inspector has no evidence the check happened, whatever you remember doing.

The records to have ready

Fire services publish their document lists, and they overlap heavily. Pulling them together, these are the items to be able to put your hand on:

Record Why it is asked for Who names it
Fire risk assessment and action plan for significant findings The foundation of your fire precautions Scottish Fire and Rescue Service
Emergency evacuation plan and premises plan Shows how people get out Devon and Somerset
Fire alarm, emergency lighting and extinguisher test and maintenance records Proves systems work and who checked them Nottinghamshire
Staff training and fire drill records Shows who was trained, when and in what Scottish Fire and Rescue Service
Electrical installation condition report and fire safety policy Part of the document review Avon
History of previous fires or false alarms Context for the risk Scottish Fire and Rescue Service

The Scottish service says its routine maintenance records should show what is checked, by whom and when. That three-part test is a good standard for every log you keep. It also wants evidence that a competent person has tested items such as the fire detection and warning system, emergency lighting and firefighting equipment, and says the list is not exhaustive.

For general health and safety, the requirements depend on your trade. HSE’s guidance for engineering businesses, for example, says inspectors may ask to see risk assessments if you have more than five employees, health surveillance records, and maintenance and test records for equipment such as lifting equipment and pressure systems, as well as information given to staff on training and supervision. Check your own sector’s HSE page for the equivalent.

Our own guides go deeper on individual records: what small businesses must record for inspections under UK fire safety law, the health and safety file contents for sites with five or more staff, and a practical guide to audit-ready records.

A preparation routine that works

1. Confirm your fire risk assessment is current

Everything else hangs from it. Check it names your premises as they are now: layout changes, new storage, a changed use of a room. Make sure each significant finding has an action with an owner and a completion record. Our guide to a fire risk assessment for small businesses walks through what it should contain.

2. Walk the site as an inspector would

Use the lists above. Are exits signed and unobstructed? Are fire doors closing properly? Is the emergency lighting working? A regular walk finds what an inspector would find, and you can fix it first. We have a fire inspection checklist for UK workplaces, a safety walk checklist for small sites and a small business safety audit checklist to work from.

The walk is only worth doing if the results are written down. A fault noticed and fixed with no record looks, to an inspector, like a check that never happened.

3. Gather the test and maintenance evidence

For each system, find the latest entry and the last engineer’s certificate. Gaps are the usual weakness: a weekly alarm test missed for a month, an emergency lighting test with no initials. See our guides to the fire alarm test log, weekly tests and six-monthly servicing, the emergency lighting test log and the fire extinguisher inspection record. First aid supplies belong in the same routine: see UK first aid kit requirements for employers. If you have electrical items, keep PAT testing records alongside.

4. Check staff knowledge and training records

Ask two or three staff, informally, what they would do if the alarm sounded. Then check that the answer is backed by an induction record and a drill log. A fire drill log with a handful of consistent fields supports your risk assessment, and a copyable induction checklist covers new starters. If you have named fire marshals, see how to appoint fire marshals at work.

5. Sort contractor paperwork

Engineer certificates and service reports are evidence an inspector expects to see. Keep them with the check they relate to, not in a drawer. Our guide to contractor management for safety records covers this.

6. Decide who meets the inspector

One named person should greet them, ask for identification and know where records are. Make sure a deputy knows too. Inspectors may ask questions of anyone on site, so brief staff to answer honestly and to say when they do not know rather than guess.

When the inspector is on site

Be co-operative and keep notes of what was asked and what was said. HSE’s leaflet notes inspectors may photograph, question and request documents, and you should offer what is asked for promptly. If you cannot find something, say so plainly and agree when you will provide it.

Ask the inspector to explain anything you do not understand, particularly any requirement they give you. At the end, make sure you know what happens next and in what form you will hear from them.

What happens if they find a problem

Finding something is common and is not automatically a disaster. The outcome depends on seriousness.

HSE. After a visit an inspector might offer advice, give a notification of contravention, give an improvement notice, give a prohibition notice, or prosecute. An improvement notice explains what is wrong, what changes are needed and the time allowed, which will be at least 21 days. A prohibition notice may order you to stop an activity until it is safe, and failing to comply is a criminal offence. HSE’s own procedure says a follow-up visit to check compliance should normally happen within 10 working days of an improvement notice’s expiry date. Have your evidence of the fix ready by then.

Fire and rescue services. Outcomes are graded. Scotland’s service describes no further correspondence, an Areas for Improvement letter, a Notification of Deficiencies requiring an action plan, an Enforcement Notice or a Prohibition Notice depending on the findings. Manchester says it writes to confirm compliance or sets out which requirements are not fully met and the action needed, and is likely to take formal action through an Enforcement Notice where a number of requirements are not met. North Wales distinguishes informal action from formal enforcement and may serve a Prohibition Notice to restrict use where risk is serious.

Whichever route applies, the response is the same: log the issue, assign an owner, set a date, fix it, and record the completion with a note or photo. The inspector who returns wants to see that trail. If a notice sets a deadline you cannot meet, speak to the enforcing body before it passes, and take legal advice if you are unsure of your position.

What happens if they find a problem

Keeping the evidence ready all year

The trouble with preparing for an inspection is that paper records tend to be good the week after a scare and patchy after. Missed tests do not announce themselves. The fix is a routine that does not rely on memory: scheduled checks, a record made at the time, and a place where certificates live.

A digital logbook does this job. Checks are scheduled with reminders, results recorded when they happen, follow-up actions tracked, and certificates stored beside the check they support. When someone leaves, their successor inherits the history rather than a blank folder. Our guides on safety document management, how to write a logbook entry and item-level inspections show how to structure entries so they stand up to questions.

Gribit for inspection-ready records

Gribit is a digital logbook for small businesses such as shops, pubs, offices, salons and village halls. You schedule recurring checks like fire alarm tests and first-aid kit inspections, record results, track follow-up actions, and store certificates and documents in one place. You can assign staff access, automate reminders, export records, and organise checks by site, item or location.

The annual plan costs £49 per year per site. If you want to see what that buys against other options, our digital logbook cost guide explains it, and the definition of a digital logbook covers the basics. You can start from the Gribit site logbook plan.

Gribit

Our view: inspections reward routine, not heroics

Most people who dread an inspection are not careless. They are busy, the checks are done, and the proof is in three places or in someone’s head. That gap is what we built Gribit to close.

We designed the logbook around automation and ease of use, so recurring checks and reminders happen without anyone chasing paper, and the person who takes over from a colleague finds the whole history in one place. We think the goal is that you spend your time resolving issues, not managing paperwork.

If you do one thing this week, pick a single recurring check, such as the fire alarm test, and make sure every entry is dated, signed and findable. Then repeat for the next one. By the time an inspector calls, the records will already be there.

Jon

FAQ

Will I get notice before an HSE inspection?

Not necessarily. HSE says inspectors may arrive without warning, and the law allows visits at any reasonable time. Fire services also state they can enter premises at any reasonable time. Keep your records ready throughout the year rather than waiting for a notice.

What will a fire inspector ask to see?

Typically your fire risk assessment, evacuation plan, test and maintenance records for alarms, emergency lighting and extinguishers, and staff training and drill records. Some services also ask for an electrical installation condition report and your fire safety policy. They may also speak to your staff about what they would do in a fire.

How long do I have to fix a problem an inspector finds?

It depends on the notice. HSE says an improvement notice will give at least 21 days. Fire services set their own timescales in the letter or notice, based on the risk. A prohibition notice can require you to stop an activity or restrict use immediately until it is made safe.

Do HSE and the fire service inspect the same things?

No, though there is overlap. Fire and rescue services are the principal enforcers of fire precautions in most workplaces, while HSE deals with fire risks arising from work activities in certain workplaces and wider health and safety. Your records for both should be kept together so either visit is straightforward.

Sources

Recommended