gribitYour logbook →
← All guides

How to Create a Compliance Calendar for Your Small Business

Published · gribit

Open planner on a small business desk

A compliance calendar is one list of every recurring check, inspection and renewal your site has to get done, with a date, a named person and a place to keep the proof. To create one, list the obligations, set how often each falls due, give each an owner, add reminders before the due date, and store the result of every check where you can find it again. Gribit’s digital logbook does that scheduling, reminding and record-keeping for £49 per year per site, so the calendar runs itself once it is set up.

This guide is for owners and managers of shops, pubs, offices, salons and village halls: people who are responsible for safety checks but do not have a compliance department. It covers the safety side in detail, because that is where small sites most often lose track of dates.

Gribit
gribit.co.uk
Keep Safety Checks Together
Gribit helps small businesses record recurring safety checks, manage follow-ups and store certificates and documents in one digital logbook.
Visit

TL;DR

  • A useful calendar has four columns that matter: what is checked, how often, who does it and where the evidence goes.
  • Start with fire safety, first aid, electrical and equipment checks, then add anything specific to your premises.
  • Separate fixed-date items (annual, six-monthly) from short cycles (daily, weekly, monthly) and from event-driven ones (after an incident or a change).
  • A reminder is only half the job: the calendar must also show what was found and what was done about it.
  • Review the whole calendar at least once a year and after any change to your premises, equipment or staff.

Table of Contents

What a compliance calendar actually is

Think of it as the diary version of your health and safety arrangements. Your risk assessments say what could go wrong. The calendar says when you will check that the controls still work, and who will do it.

For a small site it usually has three layers:

  1. Short cycles: daily, weekly and monthly checks, such as walking the escape routes or testing the fire alarm.
  2. Fixed-date items: six-monthly servicing, annual reviews, certificates that expire.
  3. Event-driven items: a review after an accident, a refit, new equipment or a new member of staff.

Most generic compliance calendars you will find online are built for filing deadlines such as tax and company law. Those dates belong in your calendar too, but the items that catch out pubs, halls and shops are the practical safety checks, because nobody sends you a letter when they are late.

Step 1: List what applies to your premises

Begin with what you already have on site. Walk round and write down every system or item that needs checking: fire alarm, emergency lighting, extinguishers, first-aid kits, electrical installation, portable appliances, ladders, lifts, gas appliances, kitchen equipment.

Then add the paperwork that goes with them: your fire risk assessment, insurance, policies, training records and contractor certificates.

The government’s guidance on workplace fire safety equipment, drills and training is a good anchor for the fire entries. It says to check regularly that fire alarms and emergency lighting work, record any faults, keep escape routes clear, make sure fire escapes open easily and fire doors close properly, and check exit signs are correctly placed. It also asks you to train new staff and to carry out at least one recorded fire drill a year.

If you are unsure who carries the legal duty for fire safety at your site, our guide to the Responsible Person for fire safety explains it in plain terms.

Where it goes wrong: people list only what they remember. A prompt list by area (front of house, kitchen, stores, plant room, outside) catches the items that live in cupboards.

What Gribit does here: you can organise checks by site, item or location, so a pub with a cellar, a kitchen and a function room can keep each area’s checks separate.

Step 1: List what applies to your premises

Step 2: Set how often each check happens

The right rhythm depends on the item and the risk. Some intervals come from rules; others come from your risk assessment and the manufacturer’s instructions.

HSE, the Health and Safety Executive, says a small business should inspect work equipment according to a risk assessment, taking account of manufacturer instructions, industry guidance and experience. It describes layers of checking: pre-use checks, weekly checks, and more thorough examinations every few months or longer. It also says the frequency can be shortened or lengthened when the evidence supports it, which means you should write down why you chose the interval.

Here is a starting point built from published examples. Treat it as a draft to adapt, not a standard that fits every site.

Check Typical rhythm Source of the rhythm
Escape routes and housekeeping Daily Sparqa’s annual action plan
Fire alarm test and first-aid kit stocking Weekly Sparqa’s annual action plan
Fire extinguishers, emergency generator Monthly Sparqa’s annual action plan
Professional inspections, fire risk assessment review Six-monthly Sparqa’s annual action plan
Fixed electrical installation Generally at least every five years, sooner if an electrician advises Shropshire Council
Lifting equipment Depends on the equipment: six-monthly for a passenger lift, annual for a goods-only scissor lift in the council’s examples Shropshire Council
Gas appliances and flues (landlords) Annually, by a Gas Safe registered engineer HSE landlord guidance
Fire drill At least once a year, recorded GOV.UK

For fire alarms and emergency lighting specifically, our pages on weekly tests and six-monthly servicing and the monthly emergency lighting test show what each entry should contain.

A useful detail on gas checks: HSE says landlords may arrange the annual check between 10 and 12 calendar months after the previous one and still keep the original deadline date. Put the original deadline in your calendar, with a booking reminder at the ten-month point.

Where it goes wrong: copying someone else’s intervals without checking them against your own equipment and risk assessment. If your kit is used heavily or in a harsh environment, your intervals may need to be tighter.

Step 3: Give every check an owner and a backup

A date with no name beside it is a wish. For each line, record:

  • the person who does the check;
  • the person who covers when they are off;
  • who signs off the result or deals with a problem.

In a small team the same person often holds several roles, and that is fine, as long as the backup is real. Holiday, sickness and staff turnover are the main reasons recurring checks lapse.

HSE puts the principle plainly for equipment: it should not be used unless you know the required inspection has taken place. That is an ownership question. Someone has to know.

What Gribit does here: you can assign staff access, so the person doing the weekly alarm test and the manager who reviews it each see what they need, and a new starter can pick up the existing records instead of starting from a blank page.

Step 4: Add reminders and a follow-up path

Reminders should arrive before the due date, not on it. For short cycles, a reminder on the day is enough. For annual and six-monthly items that need a contractor, build in lead time: booking an engineer or electrician often takes weeks.

Then add what happens when a check fails. A calendar that only says “done” or “not done” hides the real work. Each failed check needs:

  • a note of what was found;
  • an action, an owner and a target date;
  • a line showing when it was closed.

A corporate-style planning method worth borrowing: separate annual deadlines from monthly or quarterly cycles and event-driven updates, add preparation dates, and review the calendar monthly. Corpenza’s compliance calendar method sets this out for larger international firms, and the idea scales down well to a single site.

What Gribit does here: it automates reminders for recurring checks and lets you manage follow-up actions alongside the check that triggered them, so an open problem does not disappear when the next reminder arrives.

Step 5: Decide where the evidence lives

A completed check is only useful if you can show it later, to an inspector, an insurer or a new manager.

Shropshire Council advises keeping statutory inspection certificates and records together, so the duty holder can show safe systems are in place and see when certificates need renewing. It names electricity, gas, lifting equipment and pressure systems, and says to keep remedial-work records too.

Other retention points from official guidance:

  • HSE says the result of an equipment inspection should be recorded securely and kept at least until the next inspection.
  • For landlords, HSE says the gas safety record must be kept until two further checks have been completed, which can be longer than two years. The latest record goes to existing tenants within 28 days and to new tenants before they move in.
  • For reportable accidents, HSE’s RIDDOR record-keeping page says to keep a record that covers reportable injuries, over-seven-day injuries, diseases and dangerous occurrences. If you do not retain the online form, the record needs the date and method of reporting, the date, time and place of the event, the people involved and a brief description. HSE also provides a downloadable confirmation with a reference number to save with the incident record. Our RIDDOR guide for employers walks through the incident types.

Three practical rules make this work: one place for everything, a consistent naming pattern (item, date, result), and a certificate expiry date entered in the calendar the day the certificate arrives. If you want to see what a good entry looks like, see how to write a logbook entry for safety checks. For the wider filing question, our guide to what goes in a health and safety file lists the documents.

What Gribit does here: it stores certificates and supporting documents next to the checks they relate to, and you can export records when someone asks to see them.

Step 6: Review the calendar itself

The calendar is a living document. Review it:

  • once a year, in full;
  • after any change: new equipment, a refit, a different layout, a change of use, a new contractor;
  • after any incident or near miss.

A short monthly look at what is overdue, what is coming up and what is still open from earlier failed checks is enough for most small sites. Training belongs in the same review: if you want a model for what to record about staff training, tracking training compliance records shows how a field-operations team approaches it.

Items people forget

A few entries that small sites often leave out:

  • The fire risk assessment review. It is a document with a date, not just a one-off task. Our guide to fire risk assessment for small businesses covers what it should contain.
  • Fire signage. Checking that exit signs are correctly placed is part of the government’s fire-safety checks; see fire signage requirements.
  • Contractor visits. Every engineer’s visit produces a certificate or report that needs filing and a next-due date. See contractor management for safety records.
  • Safety meetings. If you hold them, keep a record; how to record safety meetings shows what to note.
  • Filing and tax dates. If you are a limited company or sole trader, add Companies House and HMRC dates as a separate colour or category so they sit in the same view but do not drown out the safety checks.

Choosing a reminder tool for inspections

When you compare reminder apps for inspections and compliance, judge them against the work above rather than the feature list. A tool earns its place if it can:

  • schedule recurring checks at different intervals, per site and per item;
  • send reminders ahead of the due date;
  • record the result of each check, with who did it and when;
  • track follow-up actions to closure;
  • hold certificates and documents with the check they belong to;
  • give different staff the access they need;
  • export records on request.

Gribit is built around exactly that list. It is a digital logbook for recurring safety checks such as fire alarm tests and first-aid kit inspections, designed so you spend your time fixing problems instead of managing paperwork. For a fuller view of the format, see what a digital logbook is and paper versus digital logbooks.

Put the calendar into one logbook

Gribit’s Site Logbook Annual Plan costs £49 per year per site. You sign up, set the checks you listed in step 1 at the rhythms from step 2, assign the people from step 3, and the reminders, follow-up tracking and document storage from steps 4 and 5 sit in the same place. For a shop, pub, office, salon or village hall, that replaces a diary, a folder of certificates and a spreadsheet with one record you can hand over when staff change.

Gribit

Start your site logbook on Gribit and enter your first weekly check today. If you want to see how the records can be arranged first, the compliance dashboard examples for shops, pubs and offices show three layouts.

Our view: a calendar is only as good as the record behind it

We built Gribit because the problem at most small sites is not knowing what to check. It is proving, a year later, that the check happened and that the problem it found was fixed.

A reminder on its own gets you to the task. What protects you is the entry made afterwards: the result, the person, the date and the follow-up. That is why we put scheduling, recording, actions and certificates in one logbook rather than treating them as separate jobs.

Our approach is to make the routine so light that it survives a busy Friday night in a pub or a staff change in an office. Automated reminders, simple records and shared access mean the person who takes over next month can see exactly where things stand. That is how we think compliance should feel for a small team: a habit, not a project.

Jon

FAQ

How often should a compliance calendar be updated?

Review it in full at least once a year, and again whenever something changes: new equipment, a refit, a new contractor or an incident. A quick monthly look at overdue and upcoming items keeps it accurate between those reviews.

What should be on a small business compliance calendar first?

Start with fire safety, because the checks are frequent and the records matter: alarm tests, emergency lighting, extinguishers, escape routes and an annual recorded fire drill. Then add first aid, electrical and equipment checks, contractor certificates and any filing dates.

Can I use a spreadsheet instead of an app?

A spreadsheet can list dates, but it will not remind anyone, track a failed check through to closure or keep the certificate beside the entry. A logbook such as Gribit does those three things as part of the same record.

How long should I keep inspection records?

It depends on the record. HSE says equipment inspection results should be kept at least until the next inspection, and landlords must keep a gas safety record until two further checks have been completed. Keep certificates and remedial-work records together so they are easy to produce.

Sources

Recommended